GPIO and I2C docking station - Giada IoT Controller

Based on ESP32-S3 Microcontroller Unit

The ESP32-S3 is a widely used microcontroller unit for IoT solutions, used to centrally process sensor signals and upload data to PCs. It is small in size, low in power consumption, and supports secondary development.
The RD01 can send data through the USB Type-C interface or RS232 serial port.

Supporting 6 GPIOs and 6 I2C

The Giada RD01 provides GPIO and I2C signal expansion for embedded PCs. The Giada RD01 is designed with 2 sets of 6-pin GPIO interfaces, with each set supporting 3 GPIO signal inputs. It has 6 sets of I2C grooves designed to connect I2C sensor modules.

Providing firmware for GPIO connected

Giada provides embedded firmware for connecting GPIO signals to the RD01. The RN01 supports customer secondary development.

I/O port introduction

Specifications	Microcontrol Unit	ESP32-S3
	Input Voltage	DC-IN, 5 V / 1A
	Rear IO	1 x USB Type-C 1 x DB9 RS232 6 x 4pin I2 C grove 2 x 6pin GPIO 1 x 5pin serial port
	LED	1 x Power supply, 1 x PC connect, 1 x IO signal
	Button	1 x TTL/RS232 switch, 1 x RESET
	Construction	Metal, White
	Dimensions	168.5 mm x 55mm x 24mm (6.63" x 2.16" x 0.94")
	Product Weight	232.6 g
	Operating Temperature	0°C ~45°C (32°F~113°F) @0.7m/s Air Flow

RD01 Product Spec

431.45 KB

2023-11-21

Download

RD01 User Manual

1.33 M

2023-11-21

Download

RD01

Welcome To Giada

Membership Registration